Unrealised proposal2026 · Iei — Memorial Portrait
At the Same Table
- Sculpture
- Participatory art
Plywood relief, a common table and collaborative making
A proposal to make wooden scenes from the objects and spaces left after a shared meal. Participants would develop a common table where a retained scene sits beside the next gathering, asking how objects and their surroundings bring an absent person to mind.
A retained meal beside the next gathering
Before clearing a shared meal, participants would observe dishes, cloth folds and the spaces between objects, then edit twelve scenes. Repeated plywood sections would turn those arrangements into shallow reliefs built into six common-table bays.
From above, the forms would suggest dishes and cloth; a lower viewpoint would expose their sections and gaps. The next meal or conversation could take place beside a retained wooden plate. The proposal brings Iei’s question of imagining an absent person through objects and their surroundings into a place used by people present together.
Participants decide what to observe, retain and place together
The initial plan assumes twelve mixed-age teams of nine, or 108 participants. Objects-only photographs, measured drawing and a partner operating the camera offer different ways to contribute. Faces, names and personal accounts of loss are not required.
Each team would make two full-size paper alternatives for one 50 × 52 cm scene, changing what to retain, omit and crop. Two teams sharing a bay would negotiate adjacent scenes, followed by collective editing of repetition, orientation and intervals across all twelve. Another team would propose a change before the selected version is measured.
Yokota would lead the question, sectional method and common construction; participants would author the scenes and their relationships, while staff retain technical responsibility. Moving paper or drawing could communicate a proposal alongside speech. Changes, rejected options and the reasons for decisions would be recorded.
Plywood sections and removable assemblies
Each scene would use twenty nominal 18 mm plywood sections on 23 mm centres, retaining 5 mm gaps. Two rods, spacers, a continuous carrier and end bars would form a removable cassette. Twelve scenes require 240 production profiles; each cassette could be removed for cleaning or repair.
Selected arrangements would be reconstructed and measured with a rounded probe at 20 mm intervals along the 23 mm-spaced sections. Photographs preserve context rather than providing automatic 3D geometry. Clean, broad substitutes could replace fragile or hygienically unsuitable originals.
The provisional fabrication envelope is a maximum 60 mm relief, a 25 mm minimum broad feature and at most 750 mm of top cut per section, avoiding undercuts and loose projecting tines. A paid wood technician would develop jigs, critical connections, orientation and repairs. Trained adults would prepare stock with power tools; participants would use supervised hand tools and jigs.
A 7.7 m line supported by six independent bays
Six 1,200 × 1,090 mm bays separated by five 100 mm breaks give a 7,700 mm overall line. Each bay would have independent support; the proposal does not assume a 7.7 m spanning beam or load-sharing connections. The breaks are not passages.
Four bays would be 760 mm high; positions two and five would be 840 mm high. Working knee-clearance figures for the higher bays are 695 mm high, 912 mm between legs and 285 mm deep at a specified height. Ground, turning, reach, 80 mm height changes and breaks need professional review and full-size use trials.
A provisional 10.7 × 4.7 m envelope includes an approximately 1.5 m outer route on existing firm ground near communal activity. Unballasted mass is estimated at 95–110 kg per bay; adults would move and secure them. The dimensions do not establish site approval or certified accessibility.
Prototypes and the collaborative programme
Before production with the full group, a complete full-size cassette, six demanding feature coupons and a support-frame prototype would be made. Trials would examine appearance, contact, deflection, gaps, wet–dry behaviour and fabrication time. Excessive duration would trigger shorter contours, broader features, remaking and retiming.
The proposed participant programme totals fifty hours, including observation, comparison, use and review alongside making. Development beginning approximately six months beforehand, paid specialist work, host meetings and handover between cohorts would be planned separately.
| Activity | Planned time |
|---|---|
| Observation | 4 hours |
| Paper alternatives | 4 hours |
| Editing twelve connected scenes | 6 hours |
| Tool trials | 2 hours |
| Profile making and assembly | 18 hours |
| Layout and installation | 8 hours |
| Use and review | 5 hours |
| Handover | 3 hours |
Outdoor use, care and storage
All wood faces and edges would be prepared and coated, with drainage avoiding rods and connections. Food would stay on dishes. Staff would check edges, fasteners, gaps, water and level at opening and after heavy rain, closing damaged parts.
Numbered components would allow dry seasonal storage and replacement using the same recorded profile. A new scene or sequence would be a separate revision with the artist and host. This proposal is unrealised; participant numbers, site, responsibilities, costs and professional acceptance criteria require agreement before implementation.