Unrealised proposal2026 · Muchi — Ignorance
Outside the Total
- Drawing
- Installation
Paper, charcoal, lifted marks and a four-plane arrangement
A proposal lifting charcoal from paper to draw a frame and a few words across folded planes. It asks how far a total made for one purpose can guide a different judgement.
How far one total can guide a judgement
This proposed wall work asks through which records we judge the conversion of wood into energy. Charcoal would be lifted from paper to reveal pale rules and a few words. The dark field would continue beyond a frame marked ENERGY SECTOR TOTAL, with RECORDED / SEPARATELY / BIOMASS CO2 and LAND / CARBON-STOCK CHANGE outside it.
IPCC national reporting records biomass-combustion CO₂ separately in Energy to avoid double counting with land carbon-stock changes. This neither establishes concealment nor proves the carbon neutrality of a facility. The work asks what ceases to be checked when an account made for one purpose is treated as a complete answer.
Four individually supported planes at different angles
The proposal uses four individually supported 400 × 1,100 mm leaves rather than one uncut folded sheet. Face widths total 1,600 mm. With 8 mm front joints, the design study gives an approximately 1,155 mm projected width and a maximum 343 mm wall projection. Full-size trials must validate dimensions and fixing.
Non-adjacent planes would face the same direction across the account’s boundary. The encounter would not rely on hidden words or a prescribed route. Equal-area flat, two-plane and four-plane studies would test what folding adds to viewing and to the boundary of the account.
Comparing removal, addition and print
On equivalent supports I would compare charcoal removal, light addition and printed controls. The plan includes six paper/fixation samples, four fresh mounted/unmounted comparisons and, if permitted, four site-material samples. Initial letter-height trials would begin at 14 and 20 mm.
A full-height leaf and a dry assembly of all four supports with full-size layouts would precede final drawing. Paper, charcoal, fixation and lighting require comparison. Cold mounting before drawing is one candidate; achieved erasure effects and material compatibility remain untested.
Researching material processes and accounting separately
The research proposes agreed observation of wood and charcoal handling at E-WERK, comparing its public account with the purposes and limits of national reporting. Even if site charcoal is available, transfer and material assessment must precede use.
Findings would inform paper, charcoal, removal, tone, fixation and wording. A facility’s public account and a national inventory have different purposes, and reading public sources does not verify site observation. Allocation and access conditions may change the material connection.
Rear support, packing and the production sequence
Each leaf would use a rear frame and mechanical retainers, with four rear links limiting the opening between paired leaves. Small top and bottom retainers would sit within paper notches; adhesive would carry no structural load. The wall, fixings, anti-release details and reinstatement require host and fabricator approval.
Planning mass is about 18.4 kg, or about 34.4 kg packed in two 1,190 × 520 × 260 mm cases. Non-contact protection, internal packing, actual weights and transport cover remain unresolved. If permanent mounting is used, paper and panel would stay together during dismantling.
The proposed sequence is documents and material trials, full-height studies and external critique, revision, support fabrication and drawing, a second critique, installation, documentation, dismantling and return. The work is unrealised; materials, venue, paid specialist roles and dates require agreement.